This is an example order for a [1-Meter Width Four Post Handloom].
It is suitable for someone wishing to weave tapestries or fabrics with a thick warp.
The list is composed of such items as reeds, shafts, shuttles, and thick thread.
The standard specification is that the warp is wrapped at the floor level with an octagonal warp beam.
It has two shafts for plain weaving.
The above example is based on the instance of a simple product.
It is only a standard order and can be changed with no trouble.
Changing The Configuration Of The Loom
The chair design, frame design, weaving width, height, back beam length, number of treadles, or shuttle container box set addition can all be adjusted to your specifications.
Number Of Shafts
The number of shafts can be between 2-6. Double shafts are also available
Alterations Or Additions Of The Reed Or Wire Heddles
According to the thickness of the warp and the density of the woven fabric, the addition or alteration of reeds or wire heddles is possible in order support a variety of weaving styles.
Changing The Warping Board To A Vertical Position
It is possible to change the placement and orientation of the warping board to a vertical position upon your request.
Changing Of Weaving Tools
The gear system spool winder can be changed to a belt system or winding
guide-led system. The electric bobbin winder can be changed to a bamboo
bobbin winder or a tabletop bobbin winder upon request.
Addition Of A Revolution Counter To The Weaving Tools (Goko Swift, Spool Winder)
With the addition of a revolution counter you will be able to roughly measure the length of the thread. This allows you to eliminate wasted thread from the ball bobbins and frame.